SuperTrak Quick Start Guide

SuperTrak EX16650 Quick Start Guide
12
17. To change the Write Cache Policy, highlight Write Cache Policy and press
Enter.
Highlight your choice of
Write Through or Write Back and press Enter.
18. To change the Read Cache Policy, highlight
Read Cache Policy and press
Enter.
Highlight your choice of
None , Read Cache , or Read Ahead and press Enter.
19. Highlight
Save Configuration and press Enter.
The Logical Drive Management screen appears with your new logical drive.
At this point you can create additional logical drives, if there is physical drive
space available. To create another logical drive, repeat steps 4 though 18
above.
20. Press the F10 key to exit the SuperBuild utility and press Y to confirm and
restart the computer.
Do not press the Ctrl-Alt-Del keys. Do not press the Esc key.
You have successfully created a new RAID logical drive.
Task 5: Installing Software Drivers
Drivers for Windows and some Linux operating systems are included on the
Software CD that came with your SuperTrak EX Controller card. Please
download the latest drivers from the Promise support website.
See Chapter 3 of the
SuperTrak User Manual on the Software CD for step-by-
step instructions for driver installation.
Important
You must be partition and format your new logical drive before you
can use it. Use the same method of partitioning and formatting a
logical drive as you would any other fixed disk added to your
computer system.