Product manual

Command Line Interface
33
Viewing Enclosure Information
To view enclosure information:
At the cli> prompt, type enclosure and press Enter.
cli>enclosure
The system returns:
-------------------------------------------------------------------
Time Since Power Up : 1 day 9 hours 46 minutes 36 seconds
Enclosure : SBB SAS 6G JBOD 3U-16 Bay
Serial Number : S987123
I/O Module ID : 1 Max I/O Module Cnt : 2
Firmware Version : 6.04.0000.00 I/O Module Role : Primary
Max HDD Slot : 16 Max Connectors : 2
Max PSU Cnt : 2 Max Fan Cnt : 4
Max Temp Sensors Cnt : 10 Max Voltage Sensor Cnt : 6
==========================================================================
PSU Status Fan1Speed Fan2Speed
==========================================================================
1 Operational 3168 rpm 2970 rpm
2 Operational 2970 rpm 3168 rpm
--------------------------------------------------------------------------
==========================================================================
ID Location Temp Reading ID Location Temp Reading
==========================================================================
1 I/O Module1 24C/ 75F 2 I/O Module1 34C/ 93F
3 I/O Module2 24C/ 75F 4 I/O Module2 33C/ 91F
5 Backplane 22C/ 71F 6 Backplane 22C/ 71F
7 PSU1 25C/ 77F 8 PSU1 25C/ 77F
9 PSU2 24C/ 75F 10 PSU2 24C/ 75F
--------------------------------------------------------------------------
Thermal Management : Enabled
Allows shutdown the system when critical temperature is reached: Yes
Current minimum fan speed : Low
Enclosure temperature threshold : 61C/141F (critical) 51C/123F (warning)
Controller temperature threshold: 90C/194F (critical) 75C/167F (warning)
===========================================================================
ID Location Voltage
===========================================================================
1 I/O Module1 1.11V
2 I/O Module1 0.93V
3 I/O Module1 3.21V
4 I/O Module2 1.11V