Product manual

VTrak J830s, J630s Product Manual

Drive Carrier LEDs

There are two LEDs on each drive carrier.

Generally speaking, if there is a disk drive in the carrier, the Power/Activity LED

displays green. If not, the LED remains dark. The Power/Activity LED flashes

during drive activity.

The Disk Status LED displays green when the drive has been configured.

Figure 2. Drive carrier LEDs

If you have SATA disk drives installed without an AAMUX adapter (see page 16),

the Power/Activity LED behavior depends on the specific disk drive.

The Disk Status LED behavior depends on your HBA or RAID controller. See the

table on the next page.

LEDs

State

Dark

Steady

Green

Flashing

Green

Amber Red

Power System Off Normal — — —

Global

enclosure

status

System Off Normal —

Malfunction –

one power

supply

Malfunction –

both power

supplies

I/O module

1 or 2

No Activity — Activity — —

Heartbeat System Off — Normal* — —

* Blinks once every 4 seconds if one I/O module is installed

or once every 2 seconds if two I/O modules are installed.

Disk Status

Power/Activity