Product manual

VTrak J830s, J630s Product Manual

Setting Up the CLI Connection

The VTrak has a Command Line Interface (CLI) to manage all of its functions,

including customization. Access the CLI via your PC’s terminal VT100 or ANSI

emulation program, such as Microsoft HyperTerminal.

The VTrak must be running and the RJ11-to-DB9 serial data cable connected to

the primary I/O module and the Host PC or Server’s serial port. See page 23.

To set up the CLI connection:

1. Change your terminal emulation program settings to agree with the

following:

• Bits per second: 115200

• Data bits: 8

• Parity: None

• Stop bits: 1

• Flow control: none

2. Start your PC’s terminal emulation program.

3. Press Enter once to launch the CLI.

The cli> prompt on your screen indicates that you have a connection and the

CLI is ready to accept commands.

See “Command Line Interface” on page 32.