Product manual

VTrak J830s, J630s Product Manual
18
• Install two screws per drive, two screws per bracket, and two screws per
adapter.
• Snug each screw. Be careful not to over tighten.
5. Reinstall the drive carrier into the VTrak chassis.
6. Repeat steps 2 through 5 until all of your disk drives are installed.
Figure 9. 2.5-inch disk drive and mounting bracket
Figure 10.Drive carrier mounting screw locations
Disk drive
mounting screws
Mounting
bracket
Disk drive
Disk drive
mounting screw
Disk drive
mounting screw
Bracket
mounting screw
Bracket
mounting screw
Note: The bracket screws are larger than disk drive screws.
Disk drive
Mounting
bracket