User's Manual

Chapter 3: Management

For this command, a 1 enables and a 0 disables.

To set the minimum fan speed to medium high, at the cli> prompt, type

enclosure -a mod -s “minfanspeed=3” and press Enter.

For this command, 1 means low, 2 means medium-low, 3 means medium-high,

and 4 means high. The actual speed depends on the fan manufacturer.

For a complete list of Enclosure commands, at the cli> prompt, type enclosure

-h and press Enter.

Help Command

The J610s and J310s CLI uses the standard Unix online help system.

For general help, at the cli> prompt, type help and press Enter.

For help with a specific function, type the name of the function and help or -h. For

example:

• At the cli> prompt, type cable -h and press Enter.

• At the cli> prompt, type cable -help and press Enter.

• At the cli> prompt, type help cable and press Enter.

Link Command

The Link command displays information about the J310s links, including:

•Link Status

•Link Counter

At the cli> prompt, type link and press Enter.

Link Status:

Port Type Rate Init Dev Link PRdy

P 0 D01 SAS 3.0G OK End ---- Rdy

P 1 D02 SAS 3.0G OK End ---- Rdy

P 2 D03 SAS 3.0G OK End ---- Rdy

P 3 D04 SAS 3.0G OK End ---- Rdy

P 4 D05 SAS 3.0G OK End ---- Rdy

P 5 D06 SAS 3.0G OK End ---- Rdy

P 6 D07 SAS 3.0G OK End ---- Rdy

P 7 D08 SAS 3.0G OK End ---- Rdy

P 8 D09 SAS 3.0G OK End ---- Rdy

P 9 D10 SAS 3.0G OK End ---- Rdy

P10 D11 ---- ---- ---- ---- ---- ----

P11 D12 ---- ---- ---- ---- ---- ----

P12 CN1 SAS 3.0G OK End ---- Rdy