User's Manual

Chapter 2: Installation

• Unpacking the VTrak (below)

• Mounting VTrak J610s in a Rack (page 11)

• Mounting VTrak J310s in a Rack (page 13)

• Installing Disk Drives (page 16)

• Setting Up Data Cable Connections (page 20)

• Setting Up Serial Cable Connections (page 25)

• Connecting the Power (page 26)

• Setting Up the CLI Connection (page 27)

Unpacking the VTrak

The VTrak J610s or J310s box contains the following items:

• VTrak J610s or J310s Unit

•Quick Start Guide

• Front bezel and key

• RJ11-to-DB9 serial data cable

(Units with one I/O module: 1)

(Units with two I/O modules: 2)

• 1.0m (3.3 ft) SAS cable

(Units with one I/O module: 1)

(Units with two I/O modules: 2)

• Screws for disk drives

(J610s: 70, including 6 spares)

(J310s: 50, including 2 spares)

• Left and right mounting rails

• Left and right center-mount brackets

• 1.5m (4.9 ft) Power cords (2)

•CD with Product Manual and Quick

Start Guide

Warning

The electronic components within the J610s and J310s units are

sensitive to damage from Electro-Static Discharge (ESD).

Observe appropriate precautions at all times when handling the

J610s or J310s unit or its subassemblies.