User Manual

VTrak E-Class Product Manual
388
2. Type the following command and press Enter:
# rpm -ivh device-mapper-multipath-0.4.7-8.el5.i386.rpm
The system returns the following lines:
Preparing... ##################### [100%]
1:device-mapper-multipath##################### [100%]
#
(or a similar message)
Verifying Packages – RedHat
To verify that the required packages are installed on the host, do the following
actions:
1. Open a terminal window.
2. Type the following command and press Enter:
# rpm -qa | grep device-mapper
If the required packages are present, the system returns the following lines.
RHEL 5.3:
device-mapper-1.02.28-2.el5
device-mapper-multipath-0.4.7-23.el5
RHEL 5.4:
device-mapper-1.02.32-1.el5
device-mapper-multipath-0.4.7-30.el5
RHEL 5.5:
device-mapper-1.02.39-1.el5
device-mapper-multipath-0.4.7-34.el5
Note that the actual version number might be different, depending on your
configuration.
Verifying Packages – SuSE
To verify that the required packages are installed on the host, do the following
actions:
1. Open a terminal window.
Important
Where possible, obtain the device mapper and multipath tool from
the original installation CDs to ensure full compatibility with your
existing OS. Refer to your OS documentation for more
information.