User Manual

Chapter 5: Management with the CLU
221
Working with Software Management
Software Management includes the following functions:
• Making Email Settings (page 221)
• Making SLP Settings (page 222)
• Making Webserver Settings (page 222)
• Making Telnet Settings (page 223)
• Making SSH Settings (page 223)
• Making SNMP Settings (page 224)
• Managing SNMP Trap Sinks (page 224)
• Making CIM Settings (page 225)
• Making Netsend Settings (page 227)
• Managing Netsend Recipients (page 227)
Making Email Settings
By default, Email service is set to Automatic and its normal status is Started.
To make Email service settings:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight Software Management and press Enter.
3. Highlight Email and press Enter.
4. Highlight Startup Type and press the spacebar to toggle between
Automatic and Manual.
5. Highlight the following and press the backspace key to erase the current
value, then type the new value:
• SMTP server IP address or server name
• Server Port number (25 is the default)
6. Highlight Authentication and press the spacebar to toggle between Yes
and No.
If you selected Yes, type in a User name and Password in the fields
provided.
7. The following items are optional but recommended. Highlight and press the
backspace key to erase the current value, then type the new value:
• Sender’s email address
• Subject Line for the email message
8. Press Ctrl-A to save your settings.