User`s manual

Hardware Installation
Drives Attachment Order By Connector
The following table shows the order in which drives should be connected to the
FastTrak66 card.
Installation Scenarios
Examine the following installation scenarios which may apply to your system.
Then proceed to Chapter 4 which covers operation of the card’s BIOS utility and
array creation.
FastTrak66 coexisting with onboard ATAPI CD-ROM
Do NOT attach ATAPI devices to FastTrak66. FastTrak66 is for hard drives only.
ATAPI IDE CD-ROM drives or other
devices can be installed on
Mainboard or add-on IDE controllers.
No configuration is necessary on the
mainboard BIOS setup.
Total Drives
One
Two
Three
Four
IDE 1
M
M
M & S
M & S
M - Master, S - Slave
IDE 2
—
M
M
M & S
3-2