Service manual

Introduction Connections and Configuration
6 - 4 0070-10-0634 Panorama® Service Manual
Use the following figure as a reference for proper component connection to the Telemetry
Server.
FIGURE 6-2 Telemetry Server (0998-00-0206-XX)
Configuring the Telemetry Server
Turn on the Telemetry Server and display(s).
Enter the Telemetry Server into the Maintenance Mode:
1. Hold down the SHIFT key on the keyboard when the Windows NT banner is displayed
on the monitor. Do not release the SHIFT key until the password Logon screen displays
on the monitor.
NOTE: The Panorama Server boots into its regular operating mode
if no keys are held during the system reboot.
2. The Login information for the Panorama Server's password screen is:
NOTE: If the login information is incorrectly entered, the Windows
NT login failure is displayed.
3. The Panorama Telemetry Server's Registry Editor dialog box is displayed if the
username/password has been entered correctly. Press the OK button to close the
Registry Editor dialog box and enter the Panorama Server configuration mode.
4. Click on the CB Config Icon. The CB System Configuration Window opens.
2.4 Telemetry
(WE-LAN)
Network Input
Mouse
Input
Keyboard
Input
Patient
Network
(E-LAN)
Input
LVDS
Cable
Input
Patient
Network
Telemetry
Network
VGA
Input
LOGON INFORMATION
User name: swadmin
Password: dscpswadmin