Service manual

Disassembly Instructions Repair Information
2 - 20 0070-10-0634 Panorama® Service Manual
Top Cover Removal
1. Disconnect all interface cables from the rear of the Panorama Wireless Transceiver.
2. Disconnect the coax cables from the front of the Panorama Wireless Transceiver.
3. If necessary, remove the Panorama Wireless Transceiver from the equipment rack.
4. Remove the 20 screws securing the top cover. This will expose the Panorama Wireless
Transceiver board, power supply, and cooling fan.
2.6.10.1 Fan Removal
1. Remove the four (4) screws securing the fan to the chassis.
2. Disconnect the AC power wires from the fan (quick disconnect tabs).
3. Remove the fan from the chassis.
2.6.10.2 Power Supply Removal
1. Disconnect the AC power input cable from the power supply.
2. Disconnect the 5/12 VDC power connector.
3. Disconnect the 9 VDC power connector.
4. Remove the four (4) screws securing the power supply to the chassis.
5. Remove the power supply from the chassis.
2.6.10.3 Panorama Wireless Transceiver Board Removal
1. Disconnect the LED Connector from the board.
2. Disconnect the Main and Diversity RF connectors from the board.
3. Disconnect the red and black wires from the 9 VDC power connector.
4. Disconnect the 5/12 VDC connector from the board.
5. Remove the 11 screws securing the board to the chassis.
6. Remove the Panorama Wireless Transceiver board from the chassis.