Service manual

Panorama® Service Manual 0070-10-0634 2 - 19

Repair Information Disassembly Instructions

2.6.10 Panorama Wireless Transceiver (WMTS Telemetry Only)

Before disassembling the unit, perform the following:

1. Power down the system and disconnect the AC line cord.

2. Remove all interface cables from the rear of the Panorama Wireless Transceiver.

3. Perform all work on a properly grounded, anti-static work area.

4. Discharge the static voltage from your body by wearing a grounded, anti-static wrist

strap.

5. Minimize the handling of static-sensitive components.

6. Store static-sensitive components in their original containers or in anti-static bags.

Refer to Figure 2-11 on page 2-19 for component locations.

FIGURE 2-11 Panorama Wireless Transceiver Components (Internal Top View)

1. Main RF Connector 6. AC Input Connector

2. Diversity RF Connector 7. Top Cover Screws (20)

3. 9 VDC Connector 8. TIM PCB Screws (11)

4. 5/12 VDC Connector 9. Fan Screws (4)

5. LED Connector 10. Power Supply Screws (4)