Service manual

Panorama® Service Manual 0070-10-0634 2 - 11
Repair Information WMTS Telemetry
2.5.3 Panorama Wireless Telemetry Server
If the Server is configured properly and communicating with the Central Station, the Server
displays the following text.
FIGURE 2-5 Confirmation of Server Configuration
If the ‘‘CB Server Created’’message does not appear, the Server is not communicating with
the Central Station. Check the cabling between the Server and the Central Station. Using a
laptop computer, "Ping" the individual devices via the Patient Network (ELAN) to verify
proper communication. If an individual device cannot be reached via the LAN, troubleshoot
the problem.
If the Panorama Wireless Telemetry Server is communicating with the telemetry devices, and
the telemetry devices are properly programmed and assigned to the equipment list, the
Server displays the following text.
FIGURE 2-6 Confirmation of Communications with Telemetry Devices
If the "WMTS Telepack Translator Initialized" message does not appear, the telemetry device
may not be in the Central Station's equipment list or the Server WMTS devices file.
Waiting for green signal from O
S
C
CB Server Created
Waiting for green signal from O
S
C
CB Server Created
WMTS Telepack Translator Initia
l
i
z
e
d
WMTS Telepack Translator Initia
l
i
z
e
d
WMTS Telepack Translator Initia
l
i
z
e
d