Service manual

System Modules, Components, and Peripherals Instrument Description
1 - 8 0070-10-0634 Panorama® Service Manual
1.3 System Modules, Components, and Peripherals
1.3.1 Panorama Central Station
The Panorama Central Station contains the Panorama Patient Monitoring Network
application software, operating system, patient data processing, and data storage
components.
The application software is stored on the system hard drive within the Panorama Central
Station. A separate hard drive stores patient historical data.
Monitors (LCD, CRT) provide a graphic display of patient waveforms and other data.
1.3.2 Network Laser Printer
A network laser printer provides ECG Strip and Patient Report printouts. One Panorama
Central Station is capable of supporting up to two printers.
The following network printers are approved for use with the Panorama Central Station:
•HP
®
4050N
HP4100N
HP4200N
1.3.3 Keyboard, Video, and Mouse (KVM) Extender
The KVM Extender allows display monitors, speakers, and mouse to be located away from
the Panorama Central Station. The KVM Extender consists of a transmitter and receiver
connected via CAT5 cable. The transmitter is located at the Central Station location, and the
receiver is located at the display monitor location. Data signals are carried by CAT5 Ethernet
cable and link the Central Station with the display monitor(s). The extenders can be located
up to a maximum of 400 ft. (122 m.) [cable distance] away from the nurses’ station.
1.3.4 Network Switches
Switches route data from bedside monitors and telemetry servers and transfer the data to the
Panorama Central Station.
Switches facilitate Central Station-to-Central Station communication, and communication to a
network laser printer.
1.3.5 Uninterruptible Power Supply (UPS)
UPS provides battery backup during a power outage and limited AC surge protection for all
Panorama Central Station components (except for a laser printer).
1.3.6 Speakers
Speakers provide audio from the Panorama Central Station (i.e., they plug directly into the
Central Station or the KVM extender).
1.3.7 Access Point (2.4 GHz Telemetry only)
The Access Point collects patient data transmitted from the bedside monitors and telepacks.