User`s manual

FastTrak100 TX/LP™ Series User Manual
93
“No Hard Drives Found” Message Appears During CD-ROM Install of
Windows NT or 2000
The "F6" key was not pressed at the appropriate time. Reboot the system, and press
the "F6" key when the message "Setup is inspecting your computer's hardware
configuration…" appears in Windows NT4 or the message "Press F6 if you need to
install third party SCSI or RAID driver" appears in Windows 2000.
Setting of FastTrak DMI Service for Windows NT/2000
The DMI NT Service allows the FastTrak to appear as an instrumented component
under DMI (Desktop Management Interface). The DMI 2.0 Service Provider, Win32sl,
must be installed in order for the FastTrak DMI service to be installed. The ftdmisvc.mif
provides the database (Management Information) for the CI (Component
Instrumentation). For further information on DMI go to the DMTF (Desktop Management
Task Force) web site at www.dmtf.org, or contact your computer vendor.