User`s manual

FastTrak100 TX/LP™ Series User Manual

Viewing Drive Assignments

The View Drive Assignments <2> option in the Main Menu displays whether drives

are assigned to a disk array or are unassigned.

Under the “Assignment” column, drives are labeled with their assigned disk array or

shown as “Free” if unassigned. Such “Free” drives can be used for a future array or

used as a spare drive when a drive fails in a mirrored array, provided the free drive’s

capacity is equal to or larger than the smallest array member. Unassigned drives are

not accessible by the OS. The menu also displays the data transfer mode that relates

to speed used by each drive (U5 refers to 100MB/sec transfers, U4 refers to

66MB/sec transfers, etc...)

[ View Drive Assignments ]

Channel:ID Drive Model Capacity(MB) Assignment Mode

1 : Master QUANTUMCR8.4A 8063 Array 1 U5

1 : Slave QUANTUMCR8.4A 8063 Free U5

2 : Master QUANTUMCR8.4A 8063 Array 1 U5

[ Keys Available ]

[↑] Up [↓] Down [ESC] Exit Mode (U=UDMA, P=PIO, D=DMA)