User`s manual

36
Using Controller Window
Clicking the “Controller” tab will reveal the Controller window. This displays physical
information about the data channels and the attached drives.
Viewing Controller Information
Left-click the FastTrak controller icon. The right pane will show the information for that array:
IRQ: Identifies the interrupt request assigned to the PCI slot.
Bus Master Base: Shows the base address in hex numbering for the board’s bus
master Input/Output function.
ROM Base Address: Shows the base address in hex numbering for FastTrak’s Flash
ROM chip.
Driver Version: Identifies the version of the Promise driver installed.
Hardware Type: Identifies the FastTrak installed.