User`s manual

31
Location: Shows the physical location of the drive. Indicates the IDE channel (1 or 2),
and whether the drive on the cable is Master or Slave. This allows the user
to identify drives for removal/replacement.
Mapping: Indicates the physical parameters of the drive (cylinders, heads, sectors).
Timing: Shows selection of the drive timing (directly related to burst speed) based
on the type of drive and cable used.
Using Array Pull-down Menu
The bottom of the window indicates that you must right mouse-click the array to run
synchronization or rebuild operations. Right-clicking displays the pull-down menu.
From this menu, you may choose to let the window appear Always on Top of the
application, Minimize the window, Synchronize mirrored drives, Rebuild a mirrored array,
use About to check FastCheck version #, or Exit the onscreen window.