User`s manual

Viewing Controller Settings

“Controller Configuration <6>” menu allows you to enable or disable the BIOS from halting if

it detected an error on boot up. You may also view the system resources (Interrupt and I/O

port address) of the data channels.

[ Adapter Configuration - Options ]

Halt On Error: Enable

[ System Resources Configuration ]

Channel 1 (IDE1) Interrupt : A I/O Port : FFF0

Channel 2 (IDE2) Interrupt : A I/O Port : FFA8

[ Keys Available ]

[←, →, Space] Change Option [ESC] Exit

Halting FastTrak BIOS On Bootup Errors

“Adapter Configuration – Options” allows you to enable or disable the Promise BIOS so as to

halt operation at the BIOS startup screen should an error be detected. This is the only option

that can be changed on this screen.