User`s manual

[ Rebuild Array Menu ]

Array No RAID Mode Total Drv Status

Array 2 Mirror 2 Critical

Stripe Block: Not Available

[ Select Drive for Rebuild ]

Channel:ID Drive Model Capacity (MB)

1 : Slave QUANTUMCR8.4A 8063

[ Keys Available ]

[↑] Up [↓] Down [ESC] Exit [Enter] Select

11. Under “Select Drive for Rebuild”, highlight the new drive.

12. Press <Enter> to confirm that the data will be copied to the selected new drive. All data

will be copied with mirrored information from the array drive to the new drive. A progress

bar will appear as below.

Please Wait While Duplicating The Image

10%

Complete

13. Once the rebuild process is complete, the user will be asked to reboot the system.