User`s manual

12
Navigating the FastBuild™ Setup Menu
The basic navigation keys are: Arrow keys to highlight through choices, <Space> key to
cycle through options, <Enter> key to select an option, and <ESC> key to abort or exit the
current menu.
The Main Menu
This is the first screen that will appear when you enter the FastBuild
TM
utility.
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
[ Main Menu ]
Auto Setup............................................... [ 1 ]
View Drive Assignments.......................... [ 2 ]
View Array............................................... [ 3 ]
Delete Array ............................................ [ 4 ]
Rebuild Array........................................... [ 5 ]
Controller Configuration .......................... [ 6 ]
[ Keys Available ]
Press 1...6 to Select Option [ESC] Exit
To create a new array automatically, follow the steps in the “Creating Arrays Automatically”
section. This option is recommended for most users.
To view drives assigned to arrays, refer to the “Viewing Drive Assignments” section.
To delete an array (but not deleting the data contained in the array), refer to the “Deleting An
Array” section.
To rebuild a mirrored array, refer to the “Rebuilding a Mirrored Array” section.
To view controller settings, refer to the “Viewing Controller Settings” section.
NOTE: After configuring an array using FastBuild, you must FDISK and format
the arrayed drive(s) if you are using new, blank drives (depending on the type
of array you are using).