User manual

Chapter 4: FastBuild™ Utility

System Resources

The information in the System Resources section might be helpful for

troubleshooting purposes:

• The system IRQ used by the FastTrak card

• ATA IO Address

• XOR and HDMA IO Address

• Sequence Control IO Address

• Flash and SRAM IO Address

Logical Drive Problems

While disk drives are highly reliable, on occasion a disk drive can fail. Fault-

tolerant (RAID 1, 5 and 10) logical drives go Critical when a disk drive fails. Non-

fault-tolerant logical drives (RAID 0) and JBOD go Offline when a disk drive fails.

When you boot your system, the FastTrak BIOS screen informs you if there is a

critical or offline logical drive. Allow your PC to finish booting and use WebPAM to

identify the failed drive and to rebuild your logical drive.

See “Logical Drive Critical / Offline” on page 85.