User manual

FastTrak TX4310 User Manual
8
Install the FastTrak Card
The FastTrak TX4310 RAID Controller card fits into any available PCI slot on
your PC's motherboard (below):
• 32-bit PCI slot (must be PCI 2.2 or 2.3 compliant)
• The 32-bit portion of a 64-bit PCI or PCI-X slot.
1. Remove the cover of your system.
Note
The FastTrak TX4310 RAID Controller card is a PCI Plug-n-Play
(PnP) device. No changes are necessary in the motherboard
CMOS/BIOS Setup for resources or drive types in most
applications.
Bracket
Attaching screw
FastTrak TX4310
PCI slots
Motherboard
System frame