User manual

FastTrak TX4310 Quick Start Guide
6
Step 4: Create Your Logical Drive
You will now use the onboard FastBuild BIOS utility to create a logical drive with
the attached drives.
For an explanation of the logical drive concepts, see Chapter 6 of the FastTrak
TX4310 User Manual.
1. Boot your system. If this is the first time you have booted with the FastTrak
card and drives installed, the Promise onboard BIOS will display the
following screen (below).
2. Press the Ctrl-F keys to display the FastBuild Utility Main Menu (below).
Important
Even if you plan to use the WebPAM software to manage your
logical drive, you must still create your first logical drive using the
FastBuild Utility, as described here.