User manual

Step 2: Install the FastTrak Card

The FastTrak TX4310 Serial ATA RAID card fits into any available PCI slot on

your PC's motherboard (below):

• 32-bit PCI slot (must be PCI 2.2 or 2.3 compliant)

• The 32-bit portion of a 64-bit PCI or PCI-X slot

1. Remove the cover of your system.

Note

The FastTrak TX4310 RAID Controller card is a PCI Plug-n-Play

(PnP) device. No changes are necessary in the motherboard

CMOS/BIOS Setup for resources or drive types in most

applications.

Bracket

Attaching screw

FastTrak card

PCI slots

Motherboard

System frame