User manual

FastTrak TX4310 Quick Start Guide

FastTrak Installation Task List

• Step 1: Unpack Your FastTrak, below

• Step 2: Install the FastTrak Card (page 3)

• Step 3: Install the Disk Drives (page 4)

• Step 4: Create Your Logical Drive (page 6)

• Step 5: Install Software Drivers (page 8)

• Step 6: Install WebPAM (page 9)

Step 1: Unpack Your FastTrak

When you receive the FastTrak TX4310 card, the package should contain the

items listed below:

• FastTrak TX4310 RAID Controller Card

• Quick Start Guide

• Four 0.65m (25.6-inch) Serial ATA disk drive data cables

• Two Y power splitter cables

• CD with Drivers, Promise RAID Management (WebPAM) software and

FastTrak TX4310 User Manual

If any of the items are missing or appear to be damaged, please contact your

dealer or distributor immediately.

Warning

The electronic components on the FastTrak RAID Controller card

are sensitive to damage from Electro-Static Discharge (ESD).

Observe appropriate precautions at all times when handling the

FastTrak card or its subassemblies.

Warning

Before installing the adapter into an existing system, backup any

important or useful data. Failure to follow this accepted PC

practice could result in data loss.