User manual

Promise Array Management

Rebuild Settings

Beeper – Right-click on the Controller icon and select Beeper from the

popup menu. A checkmark means the beeper is enabled.

Disable Hot Spare/Auto Rebuild – Disables automatic rebuilding using a hot

spare drive or a newly installed replacement drive. With this option checked, you

must initiate rebuilding manually. See RAID 1 (Mirroring) and Hot Spare Drive.

Rebuild/Sync Rate – Allocates system resources between rebuilding the array

and responding to read/write commands from the computer system.

A High setting assigns most of the system resources to a rebuild or

synchronization of the array. The process will finished sooner but read/write

requests are handled slower.

A Low setting assigns most of the system resources to handling read/write

requests. Read/write requests are handled at nearly normal speed while the

rebuild or synchronization takes longer.