User manual

Chapter 5: RAID Monitoring and Maintenance
63
Arrays
Create an Array
The available RAID selection depends on the number of disk drives available.
The table below lists the RAID Levels available with FastTrak TX Series and the
number of drives required.
See Appendix A: RAID Concepts for a more detailed description.
RAID Level Name
Minimum
drives
Maximum
drives
0 Striping 1 4
1 Mirroring 2 2
0+1 Striping + Mirroring 4 4
Table 3. RAID Levels available on FastTrak TX Series.
1. In Tree View, click the + to the left of the Controller icon to see the Disk
View icon. Look under the Disk View icon to see the unassigned disk
drives. Unassigned drives have this
icon.
2. Right-click on the Array View
icon and select New Array from the popup
menu. A Create Array icon appears.
3. The Select the Create Array icon and go to the Create Array Settings in
Information View.
Figure 39. Array Creation Setting box.