User manual

Promise Array Management

Remote PAM Log-in

Remote PAM works over your network. Therefore it requires additional steps the

first time you log on. Launch Remote PAM. When the PAM user interface

appears:

Figure 15. Make a new RAID Server.

1. Right-click on the My Console icon and:

• Select New > Server from the popup menu.

• Click the New Server icon in the Toolbar.

A RAID Server icon appears.

Figure 16. RAID System Configuration box.

2. Click on the RAID Server icon. In Information View, type in the IP

address of the computer where the Message Server Software is installed.

If the Message Server software in installed on the monitoring PC (the PC

you are now working on), you can use the default 127.0.0.1 IP address.

3. Click Commit. A list of networked RAID PCs appears as shown below.