User manual

Chapter 4: Install Drivers

Existing Installation

After installing the FastTrak Serial ATA RAID Controller card and rebooting your

system, Windows Server 2003 setup will show a “Found New Hardware” dialog

box. Under Windows 2003, “Mass Storage Controller” will be displayed.

1. Insert the FastTrak driver diskette into the A:\ drive.

2. Choose Install the software automatically and press the Enter key.

3. Choose Windows Promise FastTrak TX2200/TX4200 (tm) Controller from

the list that appears on screen, and then press the Enter key.

4. If using a driver that has not been digitally signed by Microsoft, you will be

asked if you want to continue the installation. Click Continue anyway.

5. When the New Hardware Wizard has finished installing the FastTrak driver,

click Finish.

Confirm Installation

1. Right-click on the My Computer icon and select Manage from the popup

menu.

2. From the left panel, select Device Manager.

3. Click the “+” in front of SCSI and RAID controllers. “Windows Promise

FastTrak TX2200/TX4200 (tm) Controller” should appear.