User manual

Fast Trak TX2200 / TX4200 User Manual

The Rebuild Array - Assign Spare Drive menu appears (below).

9. Press the arrow keys to highlight the replacement disk drive.

10. Press Enter to select the drive.

11. FastBuild will to copy the data from the remaining original drive to the

replacement drive and reports its progress in percent completed.

12. When rebuilding is done, press Esc twice to exit FastBuild and continue

booting your system.

[ Rebuild Array - Assign Spare Drive ]

Logical Disk No RAID Mode Total Drv Status

Logical Disk 1 Mirror 2 Critical

Stripe Block: Not Available

[ Select Drive for Rebuild ]

Channel:ID Drive Model Capacity (MB)

2:SATA ST380023AS 80630

[ ] Up [ ] Down [Esc] Exit [Enter] Select

[ Keys Available ]

Please Wait While Duplicating The Image

50% Completed