User manual

Chapter 3: FastBuild Configuration Utility

5. Press Ctrl-Y to confirm that you want to delete the logical disk.

The option appears to remove the Boot Sectors from the disk drives.

The Boot Sector contains information about where data is stored on the disk

drive. Clearing (deleting) the Boot Sector effective deletes all data from the

drive. If you choose this option, FastTrak will clear the Boot Sector from each

drive that belonged to the logical disk you just deleted.

6. To clear the Boot Sector, press Y. Otherwise, press N.

Press Ctrl-Y to confirm Boot Sector clearing.

After deleting the logical disk, FastBuild returns to the Delete Array Menu. From

here, press Esc to reach the Main Menu.

[ View Array Definition Menu ]

Logical Disk No RAID Mode Total Drv Status

Logical Disk 1 Mirror 2 Functional

Stripe Block: Not Available Gigabyte Rounding: ON

[ Drive Assignments ]

Channel ID Drive Model Capacity (MB)

1:SATA ST380023AS 80630

2:SATA ST380023AS 80630

Are you sure you want to delete this array?

Press Ctrl-Y to Delete, or others to abort.

Do you want to clear boot sector that will

delete any existing data on your hard disks?

Y - Clear boot sector / N - Delete only

Removing the Boot Sector can and will result

in a loss of data. Proceed with the removal

of the boot sector?

Any Key - Back / Ctrl-Y - Yes