User manual

Chapter 3: FastBuild Configuration Utility

1. From the FastBuild Main Menu, press 3 to choose Define Array.

2. Press the arrow keys to highlight the logical disk number you wish to define,

and press Enter to select.

3. Under the Define Array Menu section, press the arrow keys to highlight the

RAID Mode.

4. Press the Spacebar to select the Mirror RAID Mode.

Note: Gigabyte Rounding is automatically disabled when creating a Mirrored

(RAID 1) logical disk from an existing drive. This protects the existing drive's

partition table in order to maintain data integrity.

5. Under the Drive Assignments section, press the arrow keys to highlight a

disk drive.

6. Press the Spacebar to change the Assignment option to Y to add the drive to

the logical disk.

7. Press Ctrl-Y to save the logical disk information.

The window below will appear.

8. Press Y for the Create and Duplicate option.

9. The window below will appear asking you to select the Source drive to use.

Important

If you wish to include your current bootable drive using the

Windows 2000, XP or Server 2003 operating system as part of a

bootable Mirrored (RAID 1) logical disk on your FastTrak, you

MUST install the FastTrak driver onto the bootable drive while it is

still attached to your existing hard drive controller. See Chapter 4.

Do you want the disk image to be

duplicated to another or do quick

initialize or create only? (Y/N/I)

Y - Create and Duplicate

N - Create Only

I - Create and Quick Initialize