User manual

Fast Trak TX2200 / TX4200 User Manual

3. Under the Define Array Menu section, press the arrow keys to highlight the

RAID Mode.

4. Press the Spacebar to select the Mirror RAID Mode.

5. If you want to disable Gigabyte Rounding, press the arrow keys again to

highlight it.

6. Press the Spacebar to toggle Gigabyte Rounding on or off.

7. Under the Drive Assignments section, press the arrow keys to highlight a

disk drive.

8. Press the Spacebar to change the Assignment option to Y to add the drive to

the logical disk.

9. Press Ctrl-Y to save the logical disk information.

The window below will appear.

10. Press N for the Create Only option.

11. Press Esc twice to exit FastBuild and continue booting your computer..

Add Fault Tolerance to Existing Drive

FastTrak Serial ATA RAID Controller card will create a mirrored logical disk using

an existing system drive with data. You must assign the existing drive and

another drive of same or larger capacity to the Mirrored (RAID 1) logical disk. The

BIOS will copy the existing data to the new blank drive.

The Create and Duplicate function that builds the RAID 1 logical disk does not

work with a four-drive Striped/Mirrored logical disk (RAID 10).

Note

Before you can use your new logical disk, you must partition and

format the logical disk using your PC’s operating system.

Warning

Backup any necessary data before proceeding. Failure to follow

this accepted PC practice could result in data loss.

Do you want the disk image to be

duplicated to another or do quick

initialize or create only? (Y/N/I)

Y - Create and Duplicate

N - Create Only

I - Create and Quick Initialize

Do you want to do quick initialize

or create only? (Yes/No)

Y - Create and Quick Initialize

N - Create Only

4-drive RAID 10 logical disk

2-drive RAID 1 logical disk