User manual

Fast Trak TX2200 / TX4200 User Manual
24
4. Press Ctrl-Y to confirm.
The disk is re-designated as JBOD.
Spare disks are not recognized by your PC until they become part of a logical
disk.
To change a JBOD disk to a Spare:
1. From the FastBuild Main Menu, select View Drive Assignments (2).
2. In the View Drive Assignments menu, use the arrow keys to highlight a
JBOD drive you want to redisignate.
3. Press the spacebar to change the disk to Spare.
FastBuild asks for verification.
4. Press Ctrl-Y to confirm.
Fast Build again asks for verification.
5. Press Ctrl-Y to confirm.
The disk is re-designated as a Spare.
Note
Before you can use your JBOD disk, you must partition and format
it using your PC’s operating system.
Caution
When you re-designate a JBOD disk as a Spare, you lose all data
on the disk.
Do you really want to change the JBOD disk
to SPARE? Data in JBOD might be lost
after you change the assigment!
Press Ctrl-Y to change, others to abort.
Transfer JBOD disk to SPARE can and will result
in a loss of data. Proceed with changing
of the JBOD disk?
Any Key - Back / Ctrl-Y - Yes