User manual

Fast Trak TX2200 / TX4200 User Manual

Rebuilding – The process of reconstructing a logical disk in Critical mode by

placing redundant data on a replacement disk drive.

Critical – Degraded logical disk condition due to a failed or removed disk drive.

Applies to mirrored logical disks (RAID 1 and 10) only. Fault tolerance is lost but

the data is still accessible. Triggers automatic rebuilding.

Offline – Striped logical disks (RAID 0): Degraded logical disk condition due to

one failed or removed disk drive. The data is not accessible.

Mirrored logical disks (RAID 1 and 10): Degraded logical disk condition due to

two failed or removed disk drives. Fault tolerance is lost. The data is not

accessible.

If your logical disk goes Offline, contact Promise Technical Support for

assistance. See Appendix B.

Navigate the FastBuild Setup Menu

When using the menus, these are some of the basic navigation tips: Arrow keys

highlights through choices; the Space bar allows to cycle through options; Enter

selects an option; Esc aborts or exits the current menu.

Using the Main Menu

This is the first option screen when entering the FastBuild Setup.

[ Main Menu ]

[ Keys Available ]

View Drive Assignments ............[ 1 ]

View/Define Array..................[ 2 ]

Delete Array.......................[ 3 ]

Controller Configuration...........[ 4 ]

Rebuild Array......................[ 5 ]

Press 1..5 to Select Option [ESC]..Exit