User manual

Fast Trak TX2200 / TX4200 User Manual
16
FastBuild will copy all data from the Source drive to the Target drive and
report its progress in percent completed.
7. Press Esc twice to exit FastBuild and continue booting your computer.
Proceed to Chapter 4 on page 39 and install the FastTrak driver.
Security Logical Disk (Array) with Quick Initialization
Use this setting to create a Mirrored (RAID 1) logical disk with one or two existing
disk drives containing data that you do not want to keep. This method creates a
mirrored logical disk and erases the first data block from your existing drives.
Under the Security setting in Auto Setup, FastTrak assigns two drives for a single
Mirrored logical disk or four drives (TX4200) for a Striped/Mirrored logical disk
(RAID 10).
Choose this method if you wish to create a mirrored logical disk with existing disk
drives but you do not want to keep the data currently on those drives.
Follow these steps:
1. Press the Spacebar to choose Security under the Optimize Array section.
2. Press Ctrl-Y to Save your selection.
Note
Before you can use your new logical disk, you must partition and
format the logical disk using your PC’s operating system. See
page 71.
Warning
Using the Quick Initialization option on existing drives will result in
the loss of all data on those drives.
Please Wait While Duplicating The Image
50% Completed