User manual

Fast Trak TX2200 / TX4200 User Manual

This is the fastest and easiest method to creating your first logical disk.

Performance Logical Disk (Array)

Use this setting to create a Striped (RAID 0) logical disk. These logical disks have

no fault tolerance but they do have better read/write performance.

To create a logical disk for best performance, follow these steps:

1. Press the Spacebar to choose Performance under the Optimize Array for

section.

2. Press Ctrl-Y to save the logical disk information.

The window below will appear.

3. If the drives in your logical disk have been used before, press Y for the

Create and Quick Initialize option. Othewise press N to Create only..

[ Auto Setup Options Menu ]

Optimize Array for:

[ Array Setup Configuration ]

[ Keys Available ]

[ , ,Space] Change Option [ESC] Exit [Ctrl-Y] Save

Performance

Mode ............................................. Stripe

Spare Drive ...................................... 0

Drive(s) Used in Array ........................... 2

Array Disk Capacity (size in MB) ................. 32083

Do you want to do quick initialize

or create only? (Yes/No)

Y - Create and Quick Initialize

N - Create Only

Choose Quick Initialize will delete

any existing data on your hard disks.

Y - Continue, Others - Cancel