User manual

Chapter 3: FastBuild™ Utility
19
4. Choose the RAID level and options for the second logical drive.
Note that the disk drives in Channels 1, 2 and 3 reflect smaller capacities
because a portion of their original capacity belongs to a different logical
drive.
In this example the disk drive in Channel 4 is not assigned to a logical drive
in order to use it as a hot spare drive.
5. Press Ctrl-Y to save your logical drive configuration.
6. Press Esc to exit to the Main Menu. Press Esc again to exit the Utility.
7. Press Y to restart the computer.
You have successfully created a new RAID logical drive.
You must partition and format your new logical drive before you can use it. Use
the same method of partitioning and formatting a logical drive as you would any
other fixed disk added to your computer system.