User manual

WebPAM User Manual
66
If there are physical drives available, the Select RAID Level screen appears
again, where you can create an additional logical drive.
Click on the Logical Drive Icon to see all of the information about your new
logical drive.
Before you can use your new logical drive, you must partition and format the
logical drive using your PC’s operating system. See “Appendix B: Partition and
Format” on page 105 for more information.
JBOD
In WebPAM, JBOD is created, managed and deleted the same as a logical drive.
You can also use the FastTrak BIOS for this purpose. See the FastTrak User
Manual for more information on the BIOS.
JBODs do not have Settings, Rebuild, Migration, Synchronization or other
functions that pertain to Logical Drives.