User manual

Chapter 5: Monitor and Manage

3. Select the radio button beside the RAID level you want for your logical drive.

WebPAM displays the RAID levels you can use with the available disk

drives. You can also select JBOD on this screen.

See page 95 for information about the advantages and requirements of the

available RAID levels and JBOD.

4. In the Select Drive Type screen, click on the radio button for one of the

following:

• Free Drives – Select all Free (unassigned) disk drives

• Logical Drive – Select the Free portion of disk drives whose other

portion is assigned to a Logical Drive

• Manual Selection – Select your disk drives manually

The available choices depend on the RAID level you selected and the disk

drives available.

5. Click the Next button.