User manual

51
Chapter 7: Support
• Frequently Asked Questions, below
• Contact Technical Support, page 55
• Limited Warranty, page 57
• Return Product for Repair, page 59
Frequently Asked Questions
This section lists frequently asked questions involving pre-installation, drive
issues, installation, and post-installation.
Pre-Installation (Speed, Device Types, Capacity, Cabling)
What kind of HDDs can I use for a FastTrak SX4100 logical drive?
You can use any Serial ATA hard drive(s) to create arrays on the FastTrak
SX Series. Use matching drives for multiple-drive arrays to maximize
capacity usage as well as performance.
What it the maximum disk drive storage capacity of FastTrak SX4100?
FastTrak SX4100 supports up to 1.5 TB (four 400 GB disk drives).
Will ACPI work with HDDs on the FastTrak SX4100?
Yes. The FastTrak Controller supports ACPI S1, S3 and S4 standby modes.
Can I use ATAPI devices on the FastTrak SX4100?
No. The FastTrak Controller does not support ATAPI devices.
Will the FastTrak SX4100 work with 66MHz PCI bus speed?
Yes. FastTrak SX4100 supports a 66MHz PCI bus as well as a 33MHz bus.