User manual

3
Chapter 2: Installation
• Package list, below
• Installing the FastTrak Card (page 4)
• Installing the Disk Drives (page 5)
• Create a Logical Drive (page 7)
Package List
When you receive the FastTrak SX4100 card, the package should contain the
items listed below:
• FastTrak SX4100 RAID Controller Card
• Quick Start Guide
• Four 1.0m (39-inch) Serial ATA disk drive data cables
• Two Y power splitter cables
• CD with Drivers, Promise RAID Management (WebPAM) software, WebPAM
User Manual and FastTrak SX4100 User Manual
If ANY of the contents are missing or appear to be damaged, please contact your
dealer or distributor immediately..
Warning
The electronic components on the FastTrak RAID Controller card
are sensitive to damage from Electro-Static Discharge (ESD).
Observe appropriate precautions at all times when handling the
FastTrak card or its subassemblies.
Warning
Before installing the adapter into an existing system, backup any
important or useful data. Failure to follow this accepted PC
practice could result in data loss.
Note
The FastTrak SX4100 RAID Controller card is PCI Plug-n-Play
(PnP) devices. No changes are necessary in the motherboard
CMOS/BIOS Setup for resources or drive types in most
applications.