User manual

Chapter 3: FastBuild™ Utility

Setting a Disk Array as Bootable

You may select which defined array will be used as the bootable array from the

Define Array Menu (press 2 in the Main Menu). Press the up and down arrow

keys to highlight the desired array and press the Spacebar. The system will now

recognize this as the first array and an asterisk (*) will appear next to the array

number indicating it as bootable (see below).

[ Define Array Menu ]

[ Keys Available ]

Array No RAID Level Total Drv Capacity (MB) Status

Array 1 RAID5 3 161260 Functional

Array 2 ----- ----- ----- -----

Array 3 ----- ----- ----- -----

Array 4 ----- ---- ----- -----

Note: * --Bootable Array

[ ] Up [ ] Down [ESC] Exit [Enter] Select [Space] Change Boot Drive

Figure 10. Assigning a Bootable Array.

Important

You must reconfigure your PC’s or server’s BIOS in order use

FastTrak card as the bootable controller. The system will then

use the bootable array as the (fixed) boot C: drive.