Specifications

BIOS Setup Utility
11. Set SW1-3 to its default Off position.
12. Perform the post-installation instructions listed in Chapter 4.
To set a new batch of system passwords, refer to the “To Set a System Password” section.
Closing the Setup Utility
The Exit menu provides several options to close the utility. These options are listed on the
table below.
Table 5-2: Setup Utility Exit Options
Option Description
Exit Saving Changes Saves changes made and close the Setup Utility.
Exit Discarding Changes Discards changes made and close the Setup Utility.
Load Setup Defaults Loads the factory-default settings for all Setup parameters.
Discard Changes Discards all changes made to the Setup Utility and loads previous
configuration settings.
Save Changes Saves all changes made to the Setup Utility.
BIOS Update and Recovery
The following sections provide instructions on how to update/recover BIOS settings.
To Create the BIOS Update/Recovery Diskette
1. Prepare a blank and formatted 3.5-inch diskette.
2. Insert this diskette in to the FDD of any Windows PC with an HTML browser that is
connected to the Internet.
3. On HP’s website at www.hp.com locate and download the latest HP ProLiant ML110
server BIOS to the server’s hard drive.
4. Double-click the downloaded file and follow the instructions to extract the BIOS update
to the blank diskette you earlier prepared.
5. Label, date, and save this diskette as BIOS Update/Recovery.
NOTE: If you do not have convenient access to the Internet, you can create the BIOS
Update/Recovery diskette by using the HP ProLiant ML110 Server Startup CD-ROM. Please note that
the Startup CD may not provide the most recent BIOS. To create the BIOS Update/Recovery diskette,
run the Startup CD on any Windows PC with an HTML browser and follow the menu instructions.
5-8 HP ProLiant ML110 Server Operations and Maintenance Guide