User manual

Quick Start Guide
3
Step 1: Unpack Your FastTrak Card
When you receive the FastTrak S150 Series card, the package should contain
the items listed below:
• FastTrak S150 SX4 RAID Controller Card
• Quick Start Guide
• FastTrak S150 SX4 driver diskette
• Four internal 4-wire Serial ATA hard drive data cables
• Two Y power splitter cables
• CD with Drivers, Promise Array Management (PAM) utility, PAM User
Manual and FastTrak S150 SX4 / SX4000 / SX4000 Lite User Manual
If ANY of the contents are missing or appear to be damaged, please contact
your dealer or distributor immediately.
Note
The Promise card is a PCI Plug-n-Play (PnP) device. No
changes are necessary in the motherboard CMOS/BIOS Setup
for resources or drive types in most applications.
Warning
Before installing the adapter into an existing system, backup any
important or useful data. Failure to follow this accepted PC
practice could result in data loss.
Warning
The FastTrak card, like other parts of your system, is subject to
damage by static electricity. Be sure that you’re properly
grounded (Promise Technology recommends that you wear an
anti-static strap or touch a grounded object) and that you unplug
your system before installing FastTrak.