User manual

FastTrak S150 SX4-M Quick Start Guide
6
Step 4: Create Your Disk Array
1. Boot your system. If this is the first time you have booted with the FastTrak
card and drives installed, the Promise onboard BIOS will display the
following screen..
2. Press the Ctrl-F keys to display the FastBuild Utility Main Menu (below).
Important
Even if you plan to use the Promise Array Management Utility to
manage your array, you must still create your first array using the
FastBuild Utility, as described here.
FastTrak S150 SX4M (tm) BIOS Version 1.10.20
(c) 2003-2005 Promise Technology, Inc. All rights reserved.
Installed DIMM Size: 64 MB
No Array is defined...
Press <Ctrl-F> to enter FastBuild (tm) Utility...
Press <ESC> to continue booting...
<
FastBuild Array Utility 2.xx (c) 2002-2005 Promise Technology, Inc.
[ Main Menu ]
View Drive Assignments .......[ 1 ]
View/Define Array.............[ 2 ]
Delete Array..................[ 3 ]
Controller Configuration......[ 4 ]
Press 1..4 to Select Option [ESC]..Exit
[ Keys Available ]