Datasheet

Chapter 3: Management
31
DSK04 50 00 15 E0 11 4D E2 22
DSK05 50 00 15 E0 11 4D 8F B2
DSK06 50 00 15 E0 11 4D D0 62
DSK07 50 00 15 E0 11 4D DE E2
DSK08 50 00 15 E0 11 4D 8E F2
DSK09 50 00 15 E0 11 4C 97 62
DSK10 50 00 15 E0 11 4C 36 62
DSK11 50 00 00 E0 11 4F 18 E2
DSK12 50 00 00 E0 11 4F 18 D2
DSK13 50 00 00 E0 11 4D 8E 52
DSK14 50 00 00 E0 11 4D E2 22
DSK15 50 00 00 E0 11 4E 49 C2
DSK16 50 00 00 E0 11 4D DC F2
CN#1 No Device Attached
CN#2 50 00 15 5F FF C0 22 3F
----------------------------------------------------------------
The following items are reported in the table above:
• Port – DSK01 through DSK16 represent drive slots. Each slot has one PHY.
See “Drive Slot Numbering” on page 9.
CN#1 is the SAS IN port, circle icon. CN#2 is the SAS OUT port, diamond
icon. See page 21, Figure 3. Each port has four PHYs.
Route Command
To view the SAS addresses of the devices in your domain:
At the cli> prompt, type route -a list and press Enter.
The system returns:
Routing Table Mapping:
Entry# SAS Address CnID
---------------------------------------------------
0159 500000E0114D8FB2 CN#2
0163 500000E0114C2252 CN#2
0202 500000E0120B3562 CN#2
0238 500000E01212F582 CN#2
0287 500000E0120B26B2 CN#2
0365 5000155FFFC0223E CN#2
0462 500000E0114F18F2 CN#2