Datasheet

VessJBOD 1740, 1840 Product Manual
16
Connecting the Power
Plug-in the power cord on the power supply on the back of the VessJBOD
enclosure and switch on the power supply. If you have a VessJBOD 1840, plug-in
and turn on both power supplies.
When the power is switched on, the LEDs light up.
Front Panel LEDs
When boot-up is finished and the VessJBOD subsystem is functioning normally:
• Power, Global Enclosure Status, and Global RAID Status LEDs display
green continuously.
• Controller Activity LED flashes green when there is controller activity.
• System Heartbeat LED blinks green once per second.
Figure 10.VessJBOD front panel LED display
Caution
After you turn the power supply switches off, you must wait at least
10 seconds before you turn the power switches on again.
Power
Controller Activity
Global Enclosure Status
Global RAID Status
Reserved
System Heartbeat